Electrolux 65050 VI - Manual (Page 10)

Operating Instructions
10
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the
baskets are secured for transport.
Then perform the following steps:
0 1. Adjust the water softener
2. Fill with Salt for the Water Softener
3. Fill with Rinse Aid
Water softener
To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
dishwasher therefore has a built-in water softener, in which tap water
with a hardness of 4°d (German degree) and harder is softened with the
aid of special salt.
3 Your water supplier will be able to inform you about the hardness and
hardness range of the water in your area.
The water softener can be set manually using the water hardness
switch; it can also be set electronically using the buttons on the control
panel.
Water hardness
Adjusting the
hardness setting
Indication
on the
multi-dis-
play
Number of
acoustic
signals
1
In °d
2
In mmol/l
3 Range Manually Electronically
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28 9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV
1
10
4
9
8
7
6
10l
9l
8l
7l
6l
10
9
8
7
6
0*
19 - 22
15 - 18 3,3 - 3,9
2,6 - 3,2
III
5
4*
5l
4l
5
4
11 - 14 1,9 - 2,5 II 3 3l 3
4 - 10 0,7 - 1,8 I/II 2 2l 2
under 4 under 0.7 I
1
no salt
necessary
1l 1