Epson DX-TL4E User Manual
Page 22
User’s Manual
10
Panic Button
Pressing the
PANIC
button activates panic recording, so the DVR will record video regardless of
the time-lapse or event recording schedule. Press the button again to release the panic recording.
NOTE: When the DVR is in the Panic recording mode, the REC LED flickers and
displays
on each camera screen.
Camera Buttons (1 to 4)
Pressing the individual camera buttons will cause the selected camera to display full screen. They
are used to enter passwords. The camera buttons also function in the PTZ mode. Pressing
CAMERA 1
zooms in in the PTZ mode, and pressing
CAMERA 2
zooms out in the PTZ mode.
CAMERA 3
is used to control near focus of the PTZ camera in the PTZ mode.
CAMERA 4
is used to
control far focus of the PTZ camera in the PTZ mode.
Quad/Sequence Button
Pressing the
QUAD/SEQUENCE
button toggles between quad (2x2) display mode and sequence
mode. It also loads a Preset Apply in the PTZ mode.
PTZ Button
Pressing the
PTZ
button opens a Pan/Tilt/Zoom screen which allows you to control properly
configured cameras.
In the PTZ mode, pressing the
PTZ
button enters the digital zoom mode, and pressing the button
again in the digital zoom mode returns to the live monitoring mode. When a PTZ device is not
installed, pressing the
PTZ
button enters the digital zoom mode directly.
Pressing the
PTZ
button in the playback mode enters the digital zoom playback mode.
NOTE: When the DVR is in the PTZ mode, a white line will display around the image.
NOTE: In the digital zoom mode and digital zoom playback mode, a bright small box is laid
over the image. The box indicates the area to be enlarged.
Arrow Buttons
Arrow buttons are used to navigate through menus and GUI. They are also used to control Pan and
Tilt in the PTZ mode, and to move the specific area of screen that you want to enlarge in the digital
zoom mode.
In the playback mode, the Up-Arrow button selects the next image, and the Down-Arrow button
selects the previous image. Pressing the Left-Arrow button plays video backward at high speed.
Pressing the button again toggles the playback speed from
,
and
. The screen displays
,
and
respectively. Pressing the Right-Arrow button plays video forward at high
speed. Pressing the button again toggles the playback speed from ,
and
. The screen
displays ,
and
respectively.
Entering Playback mode from Live Monitoring mode can be user password protected.