Connections & setup – Curtis RLC3220 User Manual
Page 10
16
17
■In poor signal areas, to get better picture quality, install a signal amplifier
to the antenna as shown below.
■If signal needs to be split for two TVs, use an antenna signal splitter for connection.
Signal
Amplifier
UHF
VHF
CONNECTIONS & SETUP
■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.
Outdoor Antenna
RF Coaxial Wire(75 ohm)
Wall Antenna Socket
Single-family Dwelling/House
(Connect to wall jack for outdoor antenna)
VHF Antenna
UHF Antenna
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA CONNECTION
USB
1. Connect the USB Device to USB Input .
2. Select Media source with using the SOURCE / button on the romote control.
3. Select Media Mode MP3 to play.
Note: Can only support MP3 format of music
When connecting with a USB
USB CONNECTION
CONNECTIONS & SETUP