Curtis SB323 - Manual (Page 9)

Typically, Bluetooth controls are found on the device’s tools
or settings menu (see your user manual). Turn on Bluetooth
connectivity and make your device “discoverable”.
4. Choose“add a new Bluetooth device”or “setup Bluetooth
on your device, select it. If your device prompts you for a
please start pairing procedure again.
5.
a tone can be heard.
NOTE:
The unit will automatically reconnect the last paired device when
Bluetooth mode is reselected from other mode. If for some reason
the Bluetooth connection is lost due to external factors or will not
auto reconnect, you must clear the SYLVANIA from you Bluetooth
Devices list and start the pairing process again.
During playback:
• Press PLAY/PAUSE button to suspend momentarily the playing
track. Press again to resume playing.
• Press TUNE+ button to skip forward to the next track and TUNE-
button to skip backward to the previous track.
• Press MUTE button to turn off the sound. Press again to resume
the sound.
• Press VOLUME+/- buttons to adjust the volume level.
• Press BASS+/- buttons to adjust bass level.
• Press TREBLE+/- buttons to adjust treble level.
• Press EQ button to switch between POP/ JAZZ/ CLASSIC /ROCK and
NORMAL.
Troubleshooting guide
SYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION
No power
Power adapter not
connected
Connect the adapter
The unit is in Standby
mode
Press the Standby
button on the unit
or remote control to
power on the unit.
No sound
Volume in minimum
position
Raise volume level
by pressing the VOL
(Volume)+Button
The connected device
is not in playback
mode
Play the music/movie
in the connected
device
Sound output of the
device is weak
Raise volume level of
the connected device
Remote not
working
The batteries in the
remote control are
exhausted
Replace with new
battery
AUX IN / LINE IN
not working
Wrong mode is
selected
Press source button
until indicator turns
Green (AUX 1 ) /
Orange (AUX 2)
No response from
Bluetooth source
Wrong mode is
selected
Press Source button until
indicator turns Blue
The unit is connected
with another
Bluetooth device
Disconnect the
connection and retry.
The connected device
is deactivated
Activate the
connected device and
start the playback
Check the followings before requesting service.
GB-16 GB-17
After your device and the “SYLVANIA”have connected to each
other,
device”on your device. It will start to search. Once “SYLVANIA”
shows
code, please enter 0000. If the pairing attempt fails or times
out,