Curtis SDVD7037 - Manual (Page 11)

18
Troubleshooting
PROBLEM SOLUTION
Picture is distorted
If at any time in the future you should need to dispose of this product please
note that waste electrical products should not be disposed of with household
waste.Please recycle where facilities exist.Check with your Local Authority
or retailer for recycling advice.(Waste Electrical and Electronic equipment
Directive)
Owing to continuous improvement,no prior notice will be given regarding changes on
above feature and spec.
Some discs have sections that prohibit rapid
scanning or chapter skip;If you try to skip
through the warning information and credits
at the beginning of a movie,you won't be able
to.This part of the movie is often programmed
to prohibit skipping through it.
No forward or
reverse scan
The disc might be damaged.Try another disc;
it is normal for some distortion to appear during
forward or reverse scan.
The feature or action cannot be completed at
this time because:
1.The disc's software restricts it.
2.The disc's software doesn't support the
feature (e.g.,angles)
3.The feature is not available at the moment.
4.You've requested a title or chapter number
that is out of range.
The icon
appears on
screen
You can't advance through the opening credits
and warning information that appears at the
beginning of movies because the disc is
programmed to prohibit that action.
Can't advance
through a movie
Make sure the machine is connected properly.
Make sure all cables are securely inserted into
the appropriate jacks.
No sound or
distorted sound
19
Batt
ery
Battery
Main PCB
Before to discard EOL unit, please remove the waste battery by below steps:
a. Pull out the screws on the bottom cover by the screwdriver to unpack the unit.
b. Pull out the screws on the Main PCB board by the screwdriver to unpack the
PCB board and then the battery can be seen.
c. Remove the battery socket from the board.