Epson WOODWORKER'S TABLE SAW DW746 User Manual
Page 15
13
English
Lubricating Fence Head
The moving parts of your fence head
FIG. 34
should be periodically greased. This
includes the area between the cams
and locking levers, and between the
cams and the fence head casting.
Maintaining Fence
System
Your fence should always slide freely. If
it seems to require excessive force to
slide or if it feels rough, wipe the rails
and fence head gliding surface with a
cloth or paper towel. Check the move-
ment again. If it still feels rough, clean
the fence head with a mild solvent such as denatured alcohol or mineral spirits. Re-coat the
rail with a heavy coat of paste wax or a light oil. Slide the fence head back and forth several
times to coat the rail and fence. Wipe off any excess wax or oil from the rail.
If the fence head glide strips (arrows, Figure 35) become worn or damaged, it can easily be
replaced. Consult your local D
E
WALT Service Center for parts and assistance.
FIG. 35
Accessories
WARNING: Since accessories, other than those offered by D
E
WALT, have not been tested
with this product, use of such accessories with this tool could be hazardous. To reduce the
risk of injury, only D
E
WALT, recommended accessories should be used with this product.
If you need assistance in locating any accessory for your tool, please contact D
E
WALT
Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-D
E
WALT
(1-800-433-9258) or visit our website www.dewalt.com.
D
E
WALT manufactures the following accessories for your saw:
Mobile
base
Sliding Table and Premium Gauge
Iron
Wing
Outfeed
Table
52" Rail System
Dado
Throat
Plate
Steel
Wing
30" Rail System
Low Profile Fence Face
Enhanced Miter Gauge
WARNING: Accessories mounted to the arbor shaft must be rated at a higher rpm than
that shown on the tool (not motor) nameplate. Destruction to accessory and possibly injury
may result.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (includ-
ing brush inspection and replacement) should be performed by a D
E
WALT factory service
center, a D
E
WALT authorized service center or other qualified service personnel. Always
use identical replacement parts.
Three Year Limited Warranty
D
E
WALT will repair, without charge, any defects due to faulty materials or workmanship for
three years from the date of purchase. This warranty does not cover part failure due to nor-
mal wear or tool abuse. For further detail of warranty coverage and warranty repair informa-
tion, visit www.dewalt.com or call 1-800-4-D
E
WALT (1-800-433-9258). This warranty does
not apply to accessories or damage caused where repairs have been made or attempted
by others. This warranty gives you specific legal rights and you may have other rights which
vary in certain states or provinces.
In addition to the warranty, D
E
WALT tools are covered by our:
1 YEAR FREE SERVICE
D
E
WALT will maintain the tool and replace worn parts caused by normal use, for free, any
time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your D
E
WALT Power Tool, Laser,
or Nailer for any reason, you can return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For prod-
ucts sold in Latin America, see country specific warranty information contained either in the
packaging, call the local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-4-D
E
WALT for a free replacement.
DANGER
PELIGRO
KEEP HANDS AWAY
FROM BLADE
MANTENGASE ALEJADO
DE LA HOJA DE SIERRA
WARNING
• USE SAW BLADE GUARD AND SPLITTER FOR EVERY
OPERATION WHICH IT CAN BE USED, INCLUDING ALL
THROUGH SAWING.
• KEEP HANDS OUT OF THE LINE OF SAW BLADE.
• USE A PUSH-STICK WHEN REQUIRED.