Auriol H4286A_B - Manual (Page 17)

15 GB
Ensure that the screw 14 is not completely
screwed into the dowel 13 .
˽
Hang the indoor / outdoor thermometer
from the screw
14 . To do this hook the
hanger 12 of the indoor / outdoor ther-
mometer on to the screw 14 .
© Mounting the device
on a wall
˽
Pull the protective foil from one of the
sides of the self-adhesive pad
15 .
˽
Stick the self-adhesive pad 15 on to the
back of the device.
˽
Pull the protective foil from the other side
of the self-adhesive pad
15 .
˽
Take the device to the desired location
and press it carefully on to a wall or other
smooth surface.
Note: Wait 24 hours after installation until
using the device. This is to allow the self-adhe-
sive pad
15 to achieve an optimum level of
28.02.11 16:09