Encore electronic ENNUS1 - Manual (Page 18)

You can see the storage icon in the system tray.
Use the new disk as a regular disk. When you are ready to disconnect the disk, click
the storage icon in the system tray and choose “Safely remove USB Mass Storage
Device” to remove the USB storage, as the following figure.
Open the Control Center, click the USB storage device and click the “Disconnect”
button to disconnect the USB storage device.
4.9 Request to Connect
If users always use auto-connect printer and network scanner, ENNUS1 server will
automatically and properly do connect and disconnect. However, if a USB device is
manually connected by a user, nobody else can connect and use that device.
Therefore, we offer another mechanism called “Request to Connect” to solve this
inconvenience. For example, there are two computers – TEST1 and TEST2. Now the
owner of “HP Photosmart 2600” is TEST1. Then, the TEST2 computer wants to use this
HP printer. The user on the TEST2 computer can click the “Request to Connect” button
in the Control Center. The following window appears on TEST2.
17