Setting up the external sensor – Auriol Z29962E_F User Manual
Page 14
14
GB
j
Do not place the devices near sources of inter-
ference such as television sets, computers, thick 
walls, thermopane windows etc. Otherwise the 
transmission of radio waves between the devices 
may be impaired.
j
Please ensure that neighbouring devices are not
operated at the same frequency of 433 MHz. 
Such devices may cause interference to the 
radio connection.
j
Do not place the devices next to or on metal
plates. Otherwise the quality of radio wave 
transmission may be reduced.
Radio signal (DCF):
The DCF signal (time signal transmitter) is made up 
of time pulses transmitted from one of the highest 
precision clocks in the world close to Frankfurt / Main 
in Germany - it varies by 1 second in 1 million years. 
In ideal conditions, your weather station can pick 
up this signal over a distance of up to approx. 
1,500 km around Frankfurt / Main. 
Q
Setting up the external sensor
Inserting the batteries:
j
Remove the battery compartment cover from
the back of the external sensor.