Electrolux U02113 Lynic 50 - Manual (Page 21)

If you look after the burner crowns in this way they will stay reasonably
clean. However the surface will dull with time.
Aluminium based saucepans can leave shiny metal marks on the
pan supports. To clean the pan supports regularly remove the marks
using a mild abrasive like 'Jif' with a soft scourer. For more stubborn
marks you can use a soap filled pad such as 'Brillo'.
After cleaning the cooker parts, dry them
thoroughly before you put them back.
When replacing hotplate burner parts
1. Crown to body (Do not try to force the crown on to the body). Make
sure that the hole in the crown is centrally over the electrode.
Check that the two longer location pegs
sit in the slots in the body. When the
crown is in this position let it fall freely on
to the body.
Check that the crown can be moved
slightly from side to side.
2. Cap to crown
Place cap centrally on the top of crown
(enamel side up). Move sideways and
front to back to check the cap is fitted
properly.
3. Check for ignition
If a burner will not light then you need to
check the crown and cap positions.
The grill
Clean the area around the grill frequently
using hot soapy water.
After use you can soak the pan for a few
minutes and then clean it using mild
abrasives or a soap filled pad such as 'Brillo'.
The grill shelf and support may be
removed for cleaning.
Clean regularly with hot soapy water.
Mild abrasives can be used if necessary.
When you want to replace them make
sure both the shelf and support are fitted as
shown in the diagrams.
L Y R I C 5 0
21
C
ar
e
an
d
cl
ea
ni
ng