Casio CDP-220R - Manual (Page 16)

12 Channel After Touch
Message Format: DnH vvH
n: MIDI Channel Number
vv: Value
Send This message is not sent by this Instrument.
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
13 Pitch Bend
Message Format: EnH llH mmH
n: MIDI Channel Number
ll: Value LSB
mm: Value MSB
Send Sent when the bender is operated (CTK-5300, WK-330, CDP-220R only).
Receive Receipt changes the pitch of the currently sounding note. The range of the pitch change
depends on the Bend Range value setting.
16