0 nic setup and testing, 1 jumper placement, Figure 8 jumper positions – Emerson MONITORING OpenComms User Manual
Page 31: Nic s, Etup, Esting, Jumper placement, Figure 8, Jumper positions, 0 nic s
Advertising
NIC Setup and Testing
25
6.0
NIC S
ETUP
AND
T
ESTING
The NIC has a specific setup that must be in place before the card will
function properly. There are jumpers on the board that must be in the
correct locations. The positions of these jumpers are numbered on the
board itself. A small triangle silk
Advertising