Casio EX-H60 - Manual (Page 60)

60
Advanced Settings
Procedure
[r] (REC) * [SET] * MENU * “REC” Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
NOTE
• The camera may vibrate and emit a sound during the Anti Shake operation. This
does not indicate malfunction.
• Only image blur due to camera movement is reduced when shooting a movie.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while “On” or “Shooting” is selected. These
values will appear briefly, however, in the preview image that is displayed
immediately after you shoot a snapshot.
• Shooting while “On” or “Shooting” is selected can cause an image to appear
somewhat coarser than normal and can cause slight deterioration of image
resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• Anti Shake may not work properly when the camera is mounted on a tripod. Turn
off Anti Shake.
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Setting
REC Screen
Icon Display
Description
On
Reduces the effects of hand movement for up to
30 seconds from the point that the shutter button is
half-pressed. Then when the shutter button is fully
pressed to shoot, the effects of both hand
movement and subject movement are reduced.
Shooting
Reduces the effects of hand and subject movement
during recording.
Off None Turns off Anti Shake settings.
DEMO
Half-pressing the shutter button demonstrates the
effect of Anti Shake. However, the image is not
recorded.