Casio EX-MR1 - Manual (Page 35)

35
Snapshot Tutorial
Snapshot Tutorial
The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the setting you want to change.
This will select one of the Control Panel icons and display its settings.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
• You can close the Control Panel by pressing [MENU].
NOTE
• No icon is displayed for any Control Panel option (page 9) that is set to its initial
default (reset) setting. An icon will appear only if you change the setting of the
corresponding Control Panel option. The following are the initial defaults for Control
Panel options.
– Self-timer: Off
– Make-up: Off
• You also can configure settings other than those listed above (page 47).
Using the Control Panel
Control Panel Available settings
3
2
4
5
1
[SET]
[8] [2] [4] [6]
1 Recording mode (pages 27, 36, 38)
2 LED light (page 40)
3 Self-timer (page 41)
4 Silent mode (page 42)
5 Make-up (page 43)