Exmark 4500-370 - Manual (Page 19)

Maintenance
Cleaning
Clean Debris From Cutting
Deck
Service Interval: Before each use or daily
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Clean off any oil, debris, or grass build-up on the
cutting deck, especially under deck belt shields.
Clean Grass Build-Up Under
Deck
Service Interval: Before each use or daily
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Raise mower deck and secure in latched position
(see Raising the Mower Deck to the Service
Position section in Operation).
3. Clean out any grass build-up from underside of
deck and in discharge chute.
4. Lower deck to cutting position and lock deck
locking pins (see Lowering the Mower Deck to
the Operation Position section in Operation.
19