Casio EX-ZR300 - Manual (Page 39)

39
Snapshot Tutorial
IMPORTANT!
• You may not be able to achieve the brightness you want when shooting an image
that is very dark or very bright. If this happens, use the M mode to adjust the
aperture or shutter speed manually.
• In the S mode, ISO sensitivity (page 49) always operates according to its “AUTO”
setting. The ISO sensitivity setting cannot be changed while in the S mode.
• While A, S, or M is selected for the recording mode, the flash will not fire if >
(Auto Flash) or ¥ (Red Eye Reduction) is selected as the flash mode. If you want
the flash to fire, select < (Flash On) as the flash mode.
• The displayed ISO sensitivity, shutter speed or aperture value will turn orange
when you half-press the shutter button if the image is overexposed or
underexposed.
2.
Use [8] and [2] to select the setting you want to change.
This will select one of the control panel icons and display its settings.* 1
Using the Control Panel
The control panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
• You can also display the control panel by pressing
[2].
• When using a BEST SHOT (page 76) scene to shoot,
you must press [2] to display the control panel.
1 Image size/Quality* 2 (pages 41, 99)
2 Flash (page 43)
3 Focus (page 45)
4 AF Area (page 48)
5 ISO sensitivity (page 49)
6 Self-timer (page 50)
7 White balance (page 51)
8 EV shift (page 52)
9 Date/Time (page 53)
*1 Items displayed in the control panel depend on the recording mode.
*2 Image quality cannot be changed using the control panel.
[SET]
[8] [2] [4] [6]
1
9
5
3
4
7
8
2
6
Control panel