4 using the spanning tree algorithm, Using the spanning tree algorithm -8, Spanning tree configuration:selection menu screen – Enterasys Networks 5H1XX User Manual
Page 68: Spanning tree configuration: selection menu, Section 7.4
Using the Spanning Tree Algorithm
7-8
Device Control Menu Screens
7.4
USING THE SPANNING TREE ALGORITHM
The Spanning Tree Algorithm (STA) is used to detect and disable network loops, and to provide
backup links between switches, bridges or routers. This allows the switch to interact with other
bridging devices (that is, an STA-compliant switch, bridge or router) in your network to ensure that
only one route exists between any two stations on the network. The Spanning Tree
Configuration:Selection Menu screen (
) provides a menu selection to gain access to the
STA Bridge Configuration and STA Port Configuration screens to configure the STA functions.
To view the current STA bridge and port information, refer to
.
For a more detailed description of how to use this algorithm, refer to
Figure 7-4
Spanning Tree Configuration:Selection Menu Screen
STA Bridge Configuration
STA Port Configuration
<RETURN>
3583_24