Enterasys Networks 5H1XX - Manual (Page 74)

Viewing the Current Spanning Tree Configuration
7-14 Device Control Menu Screens
7.5.1 Displaying the Current STA Bridge
The STA Bridge Information screen ( Figure 7-8 ) displays the current information about the STA
Bridge. The following table describes the parameters shown on the screen.
Figure 7-8 STA Bridge Information Screen
Parameter Description
Priority Device priority is used in selecting the root device, root
port, and designated port. The device with the highest
priority becomes the STA root device. However, if all
devices have the same priority, the device with the lowest
MAC address will then become the root device.
Hello Time
(in seconds) The time interval at which the root device transmits a
configuration message.
Max Age
(in seconds) The maximum time a device can wait without receiving a
configuration message before attempting to reconfigure.
Priority : 32768
Hello Time (in seconds) : 2
Max Age (in seconds) : 20
Forward Delay (in seconds) : 15
Hold Time (in seconds) : 1
Designated Root : 32768.00001D00CCC2
Root Cost : 101
Root Port : 1
Configuration Changes : 259
Topology Up Time : 50086 (0 day 0 hr 8 min 20 sec)
<RETURN>
3583_28