Enterasys Networks 5H1XX - Manual (Page 89)

802.1Q VLAN Current Table Information
Device Control Menu Screens 7-29
7.13 802.1Q VLAN CURRENT TABLE INFORMATION
This screen shows the current port members of each VLAN and whether or not the port supports
VLAN tagging. Ports assigned to a large VLAN group that crosses several switches should use
VLAN tagging. However, if you just want to create a small port-based VLAN for one or two
switches, you can assign ports to the same untagged VLAN (refer to
Section 7.15 ). The current
configuration is shown in Figure 7-18 .
Figure 7-18 802.1Q VLAN Current Table Information Screen
NOTE: Under the screen field heading of Egress Ports, Forbidden Egress Ports, or
Tagged Ports, each number (1 or 0) represents a port. For example, next to 1 - 24 under
the Ports field heading, the leftmost number represents the port 1 and the rightmost
number represents port 24.
Parameter Description
Deleted VLAN Entry Counts The number of times a VLAN entry has been deleted from
this table.
VID The ID for the VLAN currently displayed.
Deleted VLAN Entry Counts : 0
VID Status
--------------------------
1 Permanent
Ports Current Egress Ports Current Untagged Ports
------- ------------------------------------- ------------------------------------
1 - 24 111111111111 111111111111 111111111111 111111111111
25 - 48 ----------------- ----------------- ----------------- -----------------
49 - 60 ----------------- -----------------
Sorted by VID : 1 [Show] [More]
<RETURN>
3583_38