Elmo L-1EX - Manual (Page 41)

1
OPERATION PROCEDURE
English
N o t e
• An SD card set in this product cannot be saved, deleted, locked, unlocked, or
formatted with image data from the PC.
• Image data cannot be recorded with the correct date and time.
• When the operating panel or the remote control is in operation, do not connect or
disconnect the USB cable, as this could cause the product to malfunction. This may
cause malfunctions to occur.
• Do not switch [USB Mode] on the OSD when this product is in USB-connection.
• We recommend using a USB 2.0 compliant USB cable.
• Depending on the USB environment used by the PC or peripheral equipment using
the USB 2.0 compliant cable, image transfer may be disrupted.
• Operation is not guaranteed for all environments.
• When [USB Mode] has been set to [Mass Storage] and a USB cable has been
connected to the PC, an SD card cannot be deleted, locked, unlocked, formatted,
and saved with image data on this device.
(3) This product is recognized as a removable disk. You can view the image data on an SD
card on the PC's viewer software.
• The image data is stored in JPEG format in the following folders:
My Computer
DCIM
Removable disk
100_ELMO
IMAG0001.JPG
IMAG0002.JPG
•
•
•