Casio GV-10 1 - Manual (Page 31)

GETTING ACQUAINTED
31
5.
Check to make sure
the O-ring and
contact surface of
the battery com-
partment is not
damaged and is
free of dirt and
dust.
6.
Securely close the
battery cover and
rotate the battery cover
knob to the position.
•
Rotate the knob until the
battery cover lock clicks
securely into place.
See page 38 for information about loading the memory card.
IMPORTANT!
• Do not use manganese batteries to power this cam-
era. Use only the specified types of AA-size batteries.
• Never open the battery cover while the operation lamp
is flashing. Doing so can cause the image record op-
eration to fail, and even damage the memory card.
• Never open the battery cover in an area where water
is present. Doing so creates the risk of water getting
inside the camera, resulting in unrepairable damage.
• Moving the camera from a warm room to the cold out-
doors makes pressure build up inside the camera,
which can make it difficult to open the battery cover.
• Using an O-ring that is damaged or soiled can result in
a loss of water resistance, which can lead to water
getting inside the camera and unrepairable damage.
• Whenever an O-ring becomes damaged or deformed,
take your camera to the nearest authorized CASIO
maintenance service provider to have it replaced.
Note that you will be charged for O-ring replacement.
Contact surface
O-ring