Casio MEP-U10 - Manual (Page 18)

E
16
Tape Precautions
• Leaving the tape in the printer for long periods can cause unwanted marks on the
tape, deterioration of adhesion, and even make proper printing impossible. Be
sure to remove the tape and properly store it if you do not plan to print on it for a
long time.
• This tape uses thermal paper. Use in the following types of locations can cause
discoloration of the tape, and so should be avoided.
• Near a window, outdoors, or in any other locations exposed to direct sunlight
• Locations where tape is exposed to high temperatures, rain, or splashing water
• Do not scrape the printing surface of the tape with your fi nger nail, metal objects,
etc.
• This tape uses a re-adherable type adhesive. Depending on the surface or object
to which it is affi xed, the tape may detach from the surface or leave glue residue
when removed.
• Note that long term display of this tape can result in discoloration.
• When not using tape, store it in a plastic bag or it original box.
• Do not leave tape in a motor vehicle parked in sunlight.
• Avoid locations exposed to high temperature, high humidity, and direct sunlight
when storing tape.
• The tape is subject to discoloration so use it as soon as possible after unpacking
it.
■ To remove tape from the printer
1. Open the tape compartment cover.
2. Grasp the tape with your fi ngers and lift
straight up.
• When removing tape, take care not to touch
the cutter. Touching the cutter can cause
fi nger cuts.
• The printer head becomes hot during
printing. Do not touch the printer head when
removing tape.
Printer head