Optimizing lcd display, Vesa mounting interface – Elo TouchSystems 1725L User Manual
Page 16
2-12 Elo Entuitive Touchmonitor User Guide
Optimizing LCD Display
To ensure the LCD display works well with your computer, configure the display mode of your graphic
card to make it less than or equal to 1280 x 1024 resolution, and make sure the timing of the display
mode is compatible with the LCD display. Refer to Appendix A for more information about resolution.
Compatible video modes for your touchmonitor are listed in Appendix C.
VESA Mounting Interface
Your touchmonitor conforms to the VESA Flat Panel Monitor Physical Mounting Interface (FPMPMI
TM
)
Standard which defines a physical mounting interface for flat panel monitors, and corresponding stan-
dards for flat panel monitor mounting devices, such as wall and table arms. The VESA mounting interface
is located on the back of your touchmonitor and is shipped pre-connected to the base.
You can also use the existing stand for wall mounting. For mounting dimensions, go to www.elotouch.
com/products/displcds.asp and under Mode, click on Elo Entuitive 1725L/1727L. Click on drawing
MS500378.
Note:
The above drawing displays the VESA mounting interface after the removal of the mounting cover and
base.