Escient VISION M51003-02A3 - Manual (Page 16)

Escient Vision VS & VC User’s Guide
Version: M51003-02A3
16
Step 2: Connect an Ethernet cable
Connect a Cat 5e or Cat 6 rated Ethernet cable from your giga-
bit Ethernet switch to the Ethernet port on the back of Vision.
Step 3: Connect the power cord
Plug one end of the power cord into the back of Vision and the
other end into a power outlet.
Note: Escient recommends the use of a UPS (uninter-
ruptible power supply) with surge suppression for all
Vision products.
Step 4: Turn on your TV and select the input
If your connections are OK, you should see the Vision splash
screen on your TV as the Vision is starting.
Note: Refer to the CH-1 changer accessory
kit documentation for connecting external
changers.