Symbols, Pow6128, 4 symbols – Powerplus POW6128 HEDGE TRIMMER 22.5CC 600MM EN User Manual

Page 4

Advertising
background image

POW6128

EN

Copyright © 2014 VARO

P a g e

| 4

www.varo.com

4 SYMBOLS

The following symbols are used in this manual and/or on the machine:

Denotes risk of personal
injury or damage to the tool.

Wear protective gloves

Read manual before use

In accordance with essential
safety standards of applicable
European directives

Wear hearing protection

Naked flames in the work area,
around the product and in the
vicinity of flammable materials
are prohibited!

Wear eye protection

Do not smoke in the work area,
around the product and in the
vicinity of flammable materials!

Wearing of protective shoes
advised

Wear tight-fitted protective
clothes

Wear a mask In dusty
conditions

Keep fingers away from moving
cutting blade

Objects thrown by the
product could hit the user or
other bystanders. Always
ensure that other people and
pets remain at a safe
distance from the product
when it is in operation. In
general, children must not
come near the area where
the product is.

Never operate the machine in
the rain or in damp or wet
conditions. Moisture is an
electrical shock hazard.

Risk of fire / flammable
materials

Hot surface, do not touch. The
high temperatures on the
product’s surfaces and
structural parts could cause
burns if touched. The product
can also remain hot for a long
period of time after operation!

This product produces
noxious exhaust fumes. If
the product is not used
properly, these fumes can
lead to poisoning, a loss of
consciousness or death!

Switch the engine off while you
are refilling the tank!

Warning! Switch the product
off and disconnect thespark
plug connector before caring
out any clearing or
maintenance work.

Only refuel using a petrol/oil
ratio of 1:40. Do not use pure
petrol!

Advertising