Powerplus POW63771 LAWNMOWER 98,5CC 410MM EN - Manual (Page 8)

POW63771 EN
Copyright © 2015 VARO P a g e | 8 www.varo.com
6 ASSEMBLY
6.1 Folding handle
 Fix the lower handlebars into the unit body with a suitable spanner. The nuts must always
point to the outside of the machine. (Fig. 1 a, Fig. 1b)
 Release the upper handlebars for folding.
 Connect the upper handle and the lower handle with the locking knob. The locking knobs
must always point to the outside of the machine. (Fig. 1c)

Attach the cable-clamp to the position shown and then attach the cable. Caution: Traction
and starter cables must always be positioned on top of the cross bar of the push handle.
This provides free movement of the cables on top of the lower section of the push handle,
when the handle is folded. (Fig. 1d, Fig. 1e). Incorrect mounting of these cables could
lead to damaging and/or straining them, resulting in a malfunction of the machine. In this
case the guaranty is void.
6.2 Mounting and dismounting the grass catch box/bag

To fit: Raise the rear cover and hitch the grass catch on rear of mower. (Fig. 2a, Fig. 2b,
Fig. 2c)

To remove: grasp and lift the rear cover, remove grass catch.
6.3 Starter handle
Move the starter handle from the engine to the rope guide. (Fig. 3)
6.4 Height of cut
Apply outward pressure to disengage lever from rack. Move lever forward or back to adjust
height. (Fig. 4)
6.5 Retrofitting for mulching mower
Warning: only with a stopped motor and standstill cutter
 Raise the rear cover and remove the grass bag. (Fig. 5a)
 Push the mulching wedge into the deck. Lock the mulching wedge with the button into the
opening on the deck. (Fig. 5b)
 Lower the rear cover.
7 OPERATION
7.1 Before starting
Service the engine with gasoline and oil.
Warning! Petrol is highly flammable

Store fuel in containers specifically designed for this purpose.
 Refuel outdoors only, before starting the engine and do not smoke while refueling or
handling fuel.
 Never remover the cap of the fuel tank or add petrol while the engine is running or when
the engine is hot.
 If petrol is spilled, do not attempt to start the engine but move the machine away from the
area of spillage and avoid creating any source of ignition until petrol vapors have
dissipated.

Replace all fuel tanks and container caps securely.