Powerplus POWLI235 LED TELESCOPIC 20W EN - Manual (Page 2)

POWLI235 EN
Copyright © 2014 VARO P a g e | 2 www.varo.com
5 ASSEMBLING THE FLOODLIGHT ONTO THE STAND (FIG. 1)
 First unscrew the black wing-nut (C).

Put the lamp on the H-shaped base (E) in such a way so that the two slots align. Put
the wing screw through both slots and tighten the nut.
 By loosening the wing screws (D) on both sides of the lamp you can put the lamp into
the desired angle.
 Lock the lamp in place by tightening the wing screws.
6 USING THE FLOODLIGHT
 Simply plug in the cable (F) of the floodlight to the socket.
7 SPECIFICATION
Type POWLI235
Power 20W
Voltage/frequency 220-240V~50Hz
Bulb type LED
LED service life 50000 hours
Floodlight facade material tempered glass
Waterproof protection grade IP65
8 ENVIRONMENT
Should your appliance need replacement after extended use, do not
discard it with the household rubbish but dispose of it in an
environmentally safe way.
Waste produced by electrical machine items should not be handled like
normal household rubbish. Please recycle where recycle facilities exist.
Check with your Local Authority or retailer for recycling advice.