Lubrication, Carbon brushes, Mains cable & plug – Powerplus POWXQ5102 ANGLE GRINDER 950W 115MM EN User Manual

Page 10: Technical data, Noise emission, Storage, Powxq5102, 11 technical data, 12 noise emission, 13 storage

Advertising
background image

POWXQ5102

EN

Copyright © 2013 VARO NV

P a g e

|

10

www.varo.com

Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.

10.2

Lubrication

The machine does not need any extra lubrication.

10.3

Carbon brushes

When excessive sparking occurs, or when the machine does not start or does not run
smoothly, please check the carbon brushes and replace them if necessary.(see above).

10.4

mains cable & plug

If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by

a qualified specialist (qualified electrician).

11 TECHNICAL DATA

POWXQ5102

Mains voltage / Mains
frequency

230-240 V / 50 Hz

Rated Power:

950W

No load speed

10500 min-1

Max. disc diameter:

115mm

Drive spindle thread:

M 14

Weight (+/-):

2.08 Kg

Insulation class :

/ class II

Double insulated

12 NOISE EMISSION

Noise emission values measured according to relevant standard. (k=3)

POWXQ5102

LpA (Sound pressure level) :

91 dB(A)

LwA (Sound power level) :

102 dB(A)

ATTENTION! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.

POWXQ5102

K =

aw (Vibration) :

10.6 m/s²

1.5 m/s²

13 STORAGE

 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry

place, avoid too high and too low temperatures.

 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
 Do

n’t keep it in plastic bags to avoid humidity build-up.

Advertising
This manual is related to the following products: