Stage five - configure the system, Configure the system, Stage five – Extron electronic PoleVault Systems PVS 400 User Manual
Page 38: Configuring the system, Stage 5, Stage five — configure the system
PoleVault Systems Installation • Installation — Stage 5
2-26
Stage Five — Configure the System
Stage 5
Items needed to help complete this stage:
•
Laptop (or PC) with a network connection
•
GC 2 configuration program (download fr
• MLC 104 IP Plus User’s Manual
•
Projector manufacturer’s user’s manual
•
Device driver and/or driver package
(download from
1. Configure the system
a.
Download and install Extron’s Global Configurator
(GC2) configuration program (available at
b.
Ensure the laptop (or PC), and the MLC 104 IP Plus are
connected to the LAN.
N
If this is not possible, connect a 2.5 mm TRS
configuration cable (part # 70-355-01) to the laptop
(or PC) and to the front panel configuration port of
the MLC 104 IP Plus.
c.
Launch GC2. Click on Help, then Contents (or press F1).
1a
Load Global Configurator 2 software
Stage Five — Configure the System
1c
Launch the Global Configurator 2
program