Elite Screens Portable Mobile Stand - Manual (Page 3)

Rev.122811-AS
www.elitescreens.com
Installation Instructions
Elite Screens recommends two persons to assemble the Portable Mobile Stand and to attach the
1. Insert the Wheels (D) to the Bottom Feet (H
Bottom Foot
2. Attach one Middle Support Bar (I) to the Bottom Feet (H1 &H2) and secure with the M6
Hex Screws (A) & M6 Washers (C).
Note: The three Middle Support Bars (I
M6x40 Hex Screw (A)
&
M6 Washer (C)
[email protected]
Installation Instructions
Elite Screens recommends two persons to assemble the Portable Mobile Stand and to attach the
Insert the Wheels (D) to the Bottom Feet (H1 & H2) as shown in the figure below
Wheel
(D)
Bottom Foot
(H1 & H2)
Attach one Middle Support Bar (I) to the Bottom Feet (H1 &H2) and secure with the M6
Screws (A) & M6 Washers (C).
Note: The three Middle Support Bars (I. x 3pcs) are all the same length.
Middle Support Bar
(I)
3
1
Elite Screens recommends two persons to assemble the Portable Mobile Stand and to attach the Whiteboard.
) as shown in the figure below.
Attach one Middle Support Bar (I) to the Bottom Feet (H1 &H2) and secure with the M6x40
x 3pcs) are all the same length.