Removing the metal grease filter – Electrolux DD 8795 User Manual

Page 9

Advertising
background image

60

Handle

Fig. 5

Removing the metal
grease filter

Pull the handle downards, then
extract the filter.Fig. 5.

Hand washing

Soak grease filter(s) for about one
hour in hot water with a grease-
loosening cleaner, then rinse off
thoroughly with hot water. Repeat
the process if necessary. Refit the grease filters when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select most powerful washing
programme and highest temperature, at least 65°C. Repeat the
process. Refit the grease filters when they are dry.
When washing the metal grease filter in the dishwasher a slight
discolouration of the filter can occur, this does not have any impact
on its performance.

• Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

After having re-installed the grease filter, remount the front panels
following the instructions for removal in reverse.
The narrower front panel is to be mounted at the highest position.

Advertising
This manual is related to the following products: