Eiki LC-X3/X3L - Manual (Page 40)

40
COMPUTER MODE
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select IMAGE
and press the SELECT (REAR CLICK) button. Another dialog
box PICTURE IMAGE ADJUSTMENT Menu will appear. 1
2
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 127.)
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
Point to ▼ to decrease contrast, and select ▲ to increase contrast.
(From 0 to 63.)
Point to ▼ to adjust the image darker, and select ▲ to adjust
brighter. (From 0 to 63.)
Close the PICTURE IMAGE
ADJUSTMENT Menu.
Move the arrow to
▲ or ▼ and press
SELECT (REAR
CLICK) button.
Recalls the data previously adjusted. Reset
Stores the adjusted data in the memory. Stored
Closes the PICTURE IMAGE ADJUSTMENT Menu. Quit
Move the arrow to the color that you want to adjust. Point to ▼ to
lighten the color and select ▲ to deepen the color. (From 0 to 63.)
Each of the keys operates as follow.
Fine sync
Total dots
White balance (Red / Green / Blue)
Contrast
Brightness
Point to ▼ to soften the image, and select ▲ to sharpen the image.
(From 0 to 31.)
Sharpness
PICTURE IMAGE ADJUSTMENTS
NOTE : This menu cannot be operated when the
incoming signal is digital or “RGB,”
“HDTV720p,” “HDTV1035i” or “HDTV1080i”
is selected on the SYSTEM MENU (P36
and 37).
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to select
and then press SELECT (REAR CLICK) button.