Making a tape recording, Automatic recording volume level control – Emerson Radio MS7622 User Manual

Page 20

Advertising
background image

19

MAKING A TAPE RECORDING

This model allows you to make tape recordings directly from the CD player, or the

radio.

• Refer to “PLAYING COMPACT DISCS” if necessary to operate the CD player.

• Refer to “LISTENING TO THE RADIO” if necessary to tune in the station you

wish to record from radio.

1.) Press the STOP/EJECT

key to open the cassette door..

2.) Insert a good quality blank cassette tape into the slots on the cassette door

with the open end facing down and the full reel on the left. Use normal tape

only. Do not use tape identified as “CrO

2

” (Chrome) or “Metal” tape formulations.

For best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute

or 120 minute tapes as these thinner tapes are more likely to jam in the

mechanism.

3.) Close the cassette door.

4.) When you are ready to start recording press the RECORD

key. The PLAY

Y

key will also engage. The CD you are playing, or radio program you selected

will be recorded directly on to the tape.

5.) Press the PAUSE

key during recording to stop the tape temporarily and

avoid recording unwanted material such as radio commercials.

6.) When you have finished recording press the STOP/EJECT

key to stop

and remove the tape.

Automatic Recording Volume Level Control

This unit has an Automatic Level Control (ALC) circuit which controls the recording

volume level and prevents overloaded and distorted recordings. The VOLUME

and BBS controls have no effect on recording volume level. You may change the

VOLUME control setting during the recording or even reduce the volume level to

“Minimum”. This will not effect the level of the recording.

MS7622_031504.p65

15/3/2004, 11:54

19

Advertising