Electrolux 6919941 User Manual

Page 23

Advertising
background image

Step 1: Construct the Custom Panel.

1.1 Ensure the custom panel is the same size as the panel shown in the figure below.

1.2 Drill holes in the

back

of the panel using the template provided. Follow the

instructions on the front of the template. If the template is missing follow the

instructions on following page.

Helpful Hint:

Use masking tape on your drill bit to mark a maximum drill depth of 3/8”.

3/8”

Advertising
See also other documents in the category Electrolux Dishwashers: