Edirol PC-80 - Manual (Page 21)

21
Installation and settings (Windows)
1
Start up Windows with the PC-80 disconnected.
Log on to Windows using a user name that has administrative privileges
(such as Administrator).
2
Open the System Properties dialog box.
1. Click the Windows Start menu, and from the menu that appears, select
Settings | Control Panel .
2. In Control Panel, double-click the System icon.
fig.sig2000
3
Click the Hardware tab, and then click
[Driver Signing] .
The Driver Signing Options dialog box
will appear.
4
Make sure that “File signature verification” is set “Ignore . ”
If it is set to “Ignore,” simply click [OK] .
If this is not set to “Ignore,” make a note of the current setting (“Warn” or
“Block”), change the setting to “Ignore , ” then click [OK]
5
Click [OK] to close the System Properties dialog box.
6
Exit all currently running software.
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
8
Click the Windows Start menu. From the menu that appears, select “Run...”
The “Run...” dialog box will appear.
Windows 2000 users
If you’ve changed the “File
signature verification
,”
you must restore the
previous setting after you
have installed the driver.
PC-80_e.book 21 ページ ２００５年１１月１０日 木曜日 午前１１時３４分