Epson Cinema 200+ - Manual (Page 38)

38
Installing the Software
Before you begin, make sure that the projector is not connected to your computer. Then
follow these steps to install the software:
1. Insert the Cinema Color Editor CD-ROM in your computer.
2. Turn off any anti-virus software that may be running, then click Continue .
3. Read the license agreement and click Agree .
You see this screen:
4. Click Install and follow the on-screen instructions to perform the installation.
Caution: If you will be using a USB cable to connect to your computer, be sure to let the USB
driver install as part of the installation sequence.
5. At the last screen, click Exit .
6. Restart your computer if prompted (Macintosh
only).
Not shown for Macintosh