Eiki Multimedia Port A-6 - Manual (Page 6)

Eiki A-6 manual Page 6
Programming an MCS-1 to control the A-6 Multi Media Port
• In the Eiki Control System Editor, select MCS-1 as your device.
• In “Edit behaviour” mode, double-click the key you wish to program. A
dialog like that shown will appear.
• You can choose the inputs of the A-6 you wish to select when the button is
pressed by using the drop-down items in the Multimedia Port section, as
shown.
• Eiki Control System Editor software version 2.7.15 or later has a “Relay
Output” drop-down item that allows you to operate an external relay which
can be used to control a motorised screen or lights, for example.
• Make sure that when you are programming keys that should not change the
state on the A-6 Multi Media Port, the selections are left at the default of
“No change”.
“AV 1 (rear)”
will select A in
1 and V1 in
inputs on the
rear of the unit.
Audio and video
inputs are
switched
simultaneously.
“RGB front” will
select the VGA
socket marked
“Laptop” on the
front of the unit.
Please note that
any audio
associated with an
RGB input must be
selected separately
using the
A/V Selection
drop-down. Audio
for RGB Front would
be selected with
“AV 3 (front)”