EdgeStar Wine Cooler TWR125SS - Manual (Page 4)

Your wine cooler has an interior light with an on/off switch. Turn the light on or
off by pressing the switch.
Leveling Legs
Your wine cooler is shipped with leveling legs installed. To adjust these
leveling legs, carefully lean the cooler to one side (make sure the cooler is
empty and the door is secured) and unscrew the leveling legs to make them
longer. Screw them in tighter to make them shorter.
Note: This cooler is not designed to operate with the leveling legs removed.
Bottle Capacity
Bottle capacity listed for your wine cooler is an estimated maximum capacity
based on standard 750 mL wine bottles. For any other size bottles, capacity
will vary.
Racks
Please note that the racks for your cooler have a top and a bottom. If you are
having trouble fitting the stated number of bottles in the cooler (provided you
have standard wine bottles), try flipping over one or more racks.
Also note that your wine cooler (depending upon the model) may have more
“slots” for racks than the number of racks provided with the unit.
Cleaning the Cooler
• Unplug your cooler. Remove all items from it (wine bottles, shelves,
etc.)
• Wash the inside surfaces with a mild cleaner. We suggest you use
either warm water alone, or a baking soda solution (try mixing 2
tablespoons of baking soda into a quart of water.)
• Wash the wire shelves/trays (if you have them) with a mild detergent
solution.
• Clean the wooden shelves/trays (if you have them) with a soft cloth and
some wood cleaner.
• Wash the outside of the cooler with a mild detergent solution.
• Dry any wet parts with a soft cloth.
Caution: make sure to minimize the exposure of water to any electronic or
control parts.
Extended Periods of Disuse
Your cooler can operate safely for three weeks or longer without any
adjustments. However, if the cooler is going to be left alone for several
months, you should unplug it and clean it according to the instructions above.
Pay special attention to drying the interior.
Now set the unit aside somewhere safe. You may want to crack the door
slightly to prevent mold growth or odor.
Transporting the Cooler
The ideal packaging for you cooler is its original packaging. If possible, keep
this packaging handy and repack the cooler as it was initially packed if you
need to transport it.
If you do not have the original packaging:
4