Edirol R-4 User Manual

Page 61

Advertising
background image

61

System settings

Rec Mode

MONOx1

One-channel recording to
one monaural file

This selects the structure of the project file that is
created when you record. A monaural WAV file
will be created for each channel. Choose these
settings if you’re using a separate mic for the vo-
cal and performance or each speaker in a conver-
sation, so that a separate file will be created for
each channel. These settings will create monaural
WAVE files. If

Input Select

is

Analog

, up to four

monaural files will be created. If Input Select is

Int-Mic

or

Digital

, up to two monaural files will

be created.
* You can’t select MONO x3, or MONO x4, or
STEREO x2 if

Input Select

is

Int-Mic

or

Digital

.

* You can’t select MONO x3 or MONO x4 if

Rec

Freq.

is

96 kHz

.

MONOx2

Two-channel recording to
two monaural files

MONOx3

Three-channel recording to
three monaural files

MONOx4

Four-channel recording to
four monaural files

STEREOx1

Two-channel recording to
one stereo file

Two channels will be recorded as L and R in a ste-
reo WAV file.
If

Input Select

is

Analog

, one stereo file with

channel 1 as L and channel 2 as R will be created.
The inputs of channels 3 and 4 will be ignored.
If Input Select is

Int-Mic

or

Digital

, one stereo

WAV file will be created.

STEREOx2

Four-channel recording to
two stereo files

If Input Select is Analog, a stereo file with chan-
nel 1 as L and channel 2 as R will be created, and
another stereo file with channel 3 as L and chan-
nel 4 as R will also be created.
* You can’t select STEREO x2 if Input Select is

Int-

Mic

or

Digital

.

4CHx1

Four-channel recording to
one four-channel file

Channels 1–4 will be recorded as a single WAVE
file. Be aware that not all computer software is
able to handle four-channel WAV files.
* You can’t select 4CH x1 if

Int-Mic

is set to

Digi-

tal

.

The “*” symbol means that this is not available if Input Select is set to Int-Mic or Digital.

Pre Record-
ing

OFF

, 1–29

sec

You can specify the length of time that the sound will be captured “retroactive-
ly,” starting from before the moment you pressed the [REC] (record) button.
This setting specifies the number of seconds that will be captured retroactively.
* The maximum time will depend on the sampling frequency, the sample size

(bit depth), and the mode setting.

* The R-4 consumes power even during pre-recording. If you’re running on bat-

teries, you’ll need to pay attention to the remaining battery amount.

Menu item

Value

Function

MONOx1 MONOx2 MONOx3 MONOx4 STEREOx1 STEREOx2

4CH

44.1kHz
48kHz
96kHz

✽
✽
✽

✽
✽

✽
✽

✽
✽
✽

Rec Freq.

Rec Bit

Rec Mode

Pre Recording

44.1
44.1

48
48
48
48
96
96

16
16
16
16
24
24
24
24

29
14
27
13
18

9
9
4

STEREO x1
STEREO x2
STEREO x1
STEREO x2
STEREO x1
STEREO x2
STEREO x1
STEREO x2

R-4_e.book 61 ページ 2005年2月10日 木曜日 午後3時36分

Advertising