Enterasys Networks 2E43-27 - Manual (Page 36)

9032073 E2 Device Views
2-13
Chassis Device View
Chassis Device Icon
Device Type Label
This label identifies the type of device. (Refer to Figure 2-5.) Double-click this
area to open the Device Configuration view described in Chapter 3,
Configuration Views.
Device Icon Subviews Menu
Table 2-7 lists each of the device-specific Icon Subviews menu selections
available for this device. For information on accessing device-specific
subviews, see Chapter 1, Introduction.
Application Label
This label provides access to the Bridging Icon Subviews menu. (Refer to
Figure 2-5 .) Double-click the Application label to open the CSI Bridging
Performance view described in the Operator’s Reference.
Bridging Icon Subviews Menu
Table 2-8 lists specific Icon Subviews menu selections for the Application
Label. For information on accessing device-specific subviews, see Chapter 1,
Introduction.
Table 2-7. Device Icon Subviews Menu
Menu Selection Description
Configuration Opens the Device Configuration view described in Chapter 3,
Configuration Views.
Application Display Opens the Application menu selection. This menu selection
allows you to select the physical or bridging application.
Model Information Opens the Model Information view described in the
Operator’s Reference.
Application View Opens the Application view described in Chapter 5,
Application Views.
Module Notes Opens the Module Notes dialog box.