Epson B163A - Manual (Page 53)

48
Solving Problems
Quality Problems
You see banding (light lines).
■ Clean the print head; see
page 33 for instructions.
■ Select a higher print quality and
turn off
High Speed mode; see
page 10 (Windows) or page 12
(Macintosh) for details.
■ Select the correct Type
(Windows) or Media Type
(Macintosh) for your paper; see
page 21.
■ Make sure the printable side of
the paper is face up. It’s usually
whiter or shinier.
■ The ink cartridges may need
replacing. To replace them, see
page 35.
■ Try using Automatic mode
(Macintosh only); see page 13
(OS 8.6 to 9.x) or page 15
(OS X).
■ Align the print head as
described on page 39.
Your print is blurry or smeared.
■ Make sure your paper isn’t
damp or curled, or loaded face
down (the printable side should
be face up). Reload new paper
face up.
■ Use a support sheet with special
paper, or try loading your paper
one sheet at a time.
■ Make sure your paper meets the
specifications listed in the
on-screen Reference Guide.
■ Use EPSON papers for proper
saturation and absorption of
genuine EPSON inks.
■ Align the print head as
described on page 39.