Kichler 300106 v.2 - Manual (Page 9)

8
Monarch
TM
Fig. 16
Fig. 17
10. INSTALLING THE MOUNTING PLATE
1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
2. Place the key holes on the mounting plate
over the 2 screws previously loosened from
the mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 16)
Mounting
plate
Mounting ring
Screws
11. INSTALLING THE SWITCH HOUSING
Install the switch housing onto the mounting
plate with 3 screws provided. Be sure to
tighten all screws. (Fig. 16)
Switch
housing Screws
Mounting plate