Exmark Metro 26 EN User Manual
Page 11
- 6 -
1.5.8
Keep all guards, shields and safety devices in place and in safe working condition.
1.5.9
Frequently check for worn or damaged components that could create a hazard.
1.5.10
All replacement parts must be the same as or equivalent to the parts supplied as
original equipment.
1.6 SAFETY SIGNS
1.6.1
Keep all safety signs legible. Remove all grease, dirt and debris from safety
signs and instructional labels.
1.6.2
Safety signs must be replaced if they are missing or illegible.
1.6.3
When new components are installed, be sure that current safety signs are
affixed to the replaced components.
1.6.4
New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.
1.6.5
Safety signs can be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.6.6
Familiarize yourself with the following safety signs and instruction labels. They
are critical to the safe operation of your Exmark commercial mower.
PART NO.: 43-8480
LOCATION: Top Surface of Mower Deck on
Left and Right Sides
PART NO.: 68-7410
LOCATION: Top Center of Mower Deck
PART NO.: 52-2610
LOCATION: Back of Mower Deck
PART NO.: 52-2620
LOCATION: LH Rear Corner of
Mower Deck
PART NO.: 98-4387
LOCATION: Center of Handle Bar
98-4387
PART NO.: 98-5954
LOCATION: Top of Mower Deck, Under
Belt Cover