EverFocus ED550 - Manual (Page 11)

- 11 -
4.2 Display/Close the user setup menu screen
I. Press the SET button
The menu screen will appear on the monitor as the block shown above.
II. Using the cursor switch
Adjust the switch c or d to move the cursor up or down. Move the switch e or
f to adjust the mode or parameter of settings.
III. Switch to sub-menu screens
When the item with sub-menu is selected, press the SET button to switch to the
sub-menu for further settings. Please refer to the figure below.
NOTE:
For those selected items with “ ” sign in the end, they have the sub-menu for further
settings.
IV. Return to previous page
Press SET button to return to previous page.
V. Close the menu screen
To close the menu screen, move the cursor to select EXIT and press the SET
button.
Sub-Menu
Main Menu
SETUP
> LENS DC <┘
SHUTTER ___
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
SENS-UP AUTO <┘
SPECIAL <┘
EXIT
LENS
LEVEL |+++++++++| 20
SETUP
> LENS DC <┘
SHUTTER ___
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
SENS-UP AUTO <┘
SPECIAL <┘
EXIT
Set button