Exmark OCD02 - Manual (Page 10)

Product Overview
Figure 8
1. Foot pedal 7. Gate lift link
2. Push down 8. Hairpin
3. Rear cover notch 9. Deck mount bracket
4. Cover 10. Cable nuts
5. Side cover notch 11. Knob
6. Cable 12. Link pivot bracket in
unlocked position
14. Place the rear cover notch between the two nuts
on the loose end of the cable. Tighten nuts
against the cover.
15. Place the side cover notch between the knob
and the deck mount bracket on the gate linkage
assembly and tighten.
Product Overview
Figure 9
1. Gate 2. Foot pedal
10