Eclipse - Fujitsu Ten ECLIPSE DA7232 - Manual (Page 8)

8
Specifications
34230 PA5532
13.8V POWER SUPPLY
Max. Power Output 550W × 2ch (4Ω) 125W × 4ch (2Ω), 460W × 1ch (SW, 2Ω)
2 Ω — 70W × 4ch, 280W × 1ch
Power Output 4 Ω 370W × 2ch 50W × 4ch, 200W × 1ch
4 Ω bridged — 140W × 2ch
THD @ Rated Power @ 2 Ω stereo 0.008% 0.008%
@ 4 Ω stereo 0.004% 0.004%
@ 4 Ω bridged 0.008% 0.008%
Signal to Noise 105dB 105dB
Freq. Response +0, –0.7 +0, –0.7
Crosstalk –75dB –75dB
Slew Rate 10V µs 10V µs
Damping Factor @ 60Hz >200 >200
Input Sensitivity 0.2 ~ 8V 0.2 ~ 8V
Max. Current Consumption (4 Ω) 100 amps 70 amps
CHANNELFLEX CROSSOVER
Amp Crossover High Pass 12dB/octave — 50 ~ 200Hz (Front)
120Hz (Rear)
Low Pass 12dB/octave 50 ~ 200Hz 50 ~ 200Hz
Pre-Out Crossover High Pass 12dB/octave 50 ~ 200Hz —
Low Pass 12dB/octave — —
Subsonic Filter Freq. Range 0-60Hz 20Hz (Fix)
18dB/octave 12dB/octave
Slope
(Fix) (Fix)
Dimensions (W × H × D) 18.80˝ Ч 2.05˝ Ч 11.85˝ 18.80˝ Ч 2.05˝ Ч 11.85˝
Designed, engineered and made in the U.S.A.
HIGH PASS
20k
20k 50 200
50 200
20k 60
AMPLIFER CROSSOVER OPTION :
PREOUT CROSSOVER OPTION :
–18
–12
– 6
0
–18
–12
– 6
0
–18
–12
– 6
0
LOW PASS SUBSONIC FILTER
PA5532
5/3 Channel Power Amplifier
with ChannelFlex Crossover plus Subsonic Filter
960W 34230
2 Channel Power Amplifier
with ChannelFlex Crossover plus Subsonic Filter
20k 50 200
HIGH PASS FRONT
AMPLIFER CROSSOVER OPTION :
–18
–12
– 6
0
20k 120
HIGH PASS REAR
–18
–12
– 6
0
20k 50 200
LOW PASS REAR
–18
–12
– 6
0
SUBSONIC FILTER 24dB/oct
–18
–12
– 6
0
20k 20