Echo Bear Cat CH4540 (73454) - Manual (Page 2)

4" chipper specs
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O. Box 849, West Fargo, ND 58078
Email: [email protected]
Fax: 701.282.9522
1. 20" [51cm] DIAmETER DISc
• 20" [51cm] x 1.25" [3.175cm] thick rotor disc weighs 140 lbs.
[63.5kg], machine balanced.
2. HONDA ENGINE OVERHEAD VALVE
• 614cc Honda OHV Engine with electric start (battery not
included)
3. PTO DRIVEN mODEL # cH4540 (73454)
• Is a PTO drive, category one 3-point that weighs 600 lbs.
[272kg].
4. DOubLE bANDED bELT DRIVE
5. FOuR cHIPPING bLADES
• Both have the same reversible chipper blades, heat treated
chipper steel with chrome content. 3.125" x .25"
6. ADJuSTAbLE, 4-WAY ANVIL
• To ensure good quality chipping ability.
• Chipping blade edge angle is 45 degrees for pulling logs
and limbs into the chipper.
7. EASY AccESS
• The disc is accessible through the hinged disc cover by
removing one bolt, which exposes one-half of the disc for
easy access to the chipping blades and for easy inspection
and maintenance.
8. 360 0 ROTATING DIScHARGE cHuTE WITH DEFLEcTOR cAP
• Put the chips where you want them the first time.
9. HEAVY-DuTY cONSTRucTION
• Heavy .25" [6.35mm] steel throughout, seam welded.
10. LARGE FEED HOPPER
• Feed your prunings or limbs into a 27" x 28" [68.6cm x
71.1cm] opening.
11. cHIPPER cHuTE
• Opening is 5.5" x 7" [14cm x 17.8cm] (for side limbs).
12. ADJuSTAbLE JAcK STAND (73413 & cH4614 (73420) TOW-
AbLE mODELS)
• Allows one person to easily maneuver the chipper and hook
up to a vehicle.
13. TORSION AXLE SuSPENSION (cH4614 (73420) TOWAbLE
mODEL)
• A towable torflex suspension axle with 5.30 x 12 [13.5cm x
30.5cm] tires.
14. WEIGHT
• 614cc Honda chipper weighs 820 lbs. [372kg]
• PTO chipper weighs 600 lbs. [272kg]
15. 2" [5.08cm] bALL cOuPLER
16. SAFETY
• Meets all applicable ANSI safety standards.
17. PARTS
• Single-Edge Chipper Blade Kit (#70453)
• Double-Edge Chipper Blade Kit (#72493)