Echo P-953 - Manual (Page 7)

-7-
cn cn cn cn cn
PAUSE (PAU) BUTTON
The Pause function is used to freeze disc play when the CD player
or optional CD changer is in use. S--PAUSE will appear on the display.
Press this button again to resume disc play from the point at which it
was stopped and S--PAUSE will disappear.
co co co co co
TRACK SCAN (SCN) SELECT
During disc play, press this button to play the first 10 seconds of
each track on the disc (S--SCN) will appear on the display panel).
When a desired track is reached, press the SCN button again to
cancel the function (S--SCN will disappear from the display panel)
and play of the selected track will continue. Scan mode will also be
canceled by activating Repeat Play
cp
, or Shuffle Play
cq
.
cp cp cp cp cp
REPEAT PLAY (RPT) SELECT
During disc play, press this button to repeat the play of the selected
track (S--RPT will appear on the display panel). Play of the track will
continue to repeat until the button is pressed again and the S--RPT
indication disappears from the display panel. Repeat Play mode will
also be canceled by activating the Track Scan
co
or Shuffle Play
cq
functions.
cq cq cq cq cq
SHUFFLE PLAY (SHF) SELECT
During disc play, press this button to play the tracks on the disc in a random
shuffled order (S--SHF will appear on the display panel). In Shuffle Play
mode, the TRACK Select function
cl
will also select tracks in the random
order instead of the normal progression. The Shuffle Play mode can be
canceled by pressing the button again (S--SHF indication will disappear
from the display panel) or by activating the Repeat Play
cp
or Track Scan
co
functions.
cr cr cr cr cr
DISC SELECT UP/DOWN (D.UP/D.DN)
These buttons are used to select the desired disc for play during
changer operation. To advance to a higher number disc, press the
D.UP button, and to return to a lower number disc, press the D.DN but-
ton. The number of the disc in play will be shown on the display panel.
cs cs cs cs cs
DISC EJECT ( )
Disc play is stopped and the disc is ejected when the front panel is
folded down and this button on the rear of the panel is pressed.
Radio or CD changer operation will automatically resume depending on
which mode was in operation prior to disc play. If the disc is not
removed from the unit within 15 seconds of being ejected, it will
automatically be re-loaded into the unit to prevent it from being
accidentally damaged ( will appear on the display panel to indicate
that a disc is loaded in the player). Play of the disc can be resumed
by using the MODE button
bt
to choose the CD player function.
ct ct ct ct ct
TIME/FREQUENCY (T/F) DISPLAY BUTTON
During radio operation, press this button to call the time display on
the incorporated quartz clock. The current time will appear together
with an A or P indication. The display will return to the radio frequency
indication after 5 seconds.
During disc play, press this button will call the time display. The
display will return to the disc indication after 5 seconds.
cu cu cu cu cu
EQUALIZER BUTTON (EQ)
The EQ button applies preset sound effects to the unit’s audio output
signal. The EQ button, when pressed, will activate one of the following
operating modes: CLASSICS, POP M, JAZZ, DSP OFF or FLAT. Even
though the EQ function is active, as displayed on the panel, if the bass
and/or treble level is set, the EQ function automatically returns to the
FLAT mode. Conversely, when the Equalizer function is not active,
the unit returns to the user set bass and treble levels.