Florabest FTS 1100 B2 - Manual (Page 5)

5
GB
Overview
1 Round handle
2 Pump housing
3 Pump outlet
4 Floor plate
5 Foot part
6 Mains connection cable
7 Float switch
8 Float switch grating
9 Reducer
10 Angle adapter
11 8 m cord
Technical Data
Dirty water submersible pump FTS 1100 B2
Mains connection ...............230 V~50 Hz
Power consumption ................... 1100 W
Max. discharge rate (Q max) .. 20000 l/h
Max. discharge head (H max) ........ 8.0 m
Max. depth of immersion .................. 8 m
Max. water temperature (T max) ...... 35°C
Hose connection .............. 1“, 1¼ “, 1½ “
Max. foreign body size .................35 mm
Switching point level:
ON ...........................approx. 520 mm
OFF ...........................approx. 230 mm
Mains cable .................................. 10 m
Weight ....................................... 6.6 kg
Safety class .......................................... I
Degree of protection .........................IPX8
Technical and optical changes can be
carried out in the course of further devel-
opment without notice. All dimensions,
references and information of this instruc-
tion manual are without guarantee. Legal
claims, which are made on the basis of the
instruction manual, cannot thus be consid-
ered as valid.
The manufacturer shall not be liable for
damages caused by use other than for
which the equipment is intended or by in-
correct operation.
General Description
The diagram of the most impor-
tant functional elements can be
found on the foldout side.
Scope of Delivery
Carefully unpack the appliance and check
that it is complete:
- Fully assembled sewage water pump
- Angle adapter
- Reducer
- 8 m cord
- Instruction Manual
Dispose of the packaging material cor-
rectly.
Functional description
The dirty water submersible pump has a
stainless steel casing, a stable suction foot
and a non-corrosive motor shaft with ce-
ramic seal. It has a cooling jacket, through
which the pumped water flows around the
motor to the two brass-threaded pump out-
lets. The pump is fitted with a float switch,
which automatically switches the equip-
ment on or off.
The motor is protected from overload by a
thermal safety switch.
Please refer to the following descriptions
for the function of the operating parts.