Florabest FKS 2200 D2 - Manual (Page 68)

68
GB MT
• When cleaning, also remove the chain
wheel cover (15) so that this area can
be cleaned as well.
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
Maintenance intervals
Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Maintenance Interval Table
Machine part Action
Before
every
use
After 10 hours
of operation
Components of the chain
brake
Check, replace if required 
Sprocket chain wheel Check, replace if required 
Saw chain (5)
Check oil, regrind or re-
place if required

Guide bar (4)
Check, turn round, clean
and oil
 
Cleaning
• Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid acci-
dents.
• Keep the gripping handles free of pet-
rol, oil or grease. Clean the gripping
handles, where appropriate, with a
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.